Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN: Safety guide
Installation
............................................................................................................................................................................................................................................................
Electrostatic discharge (ESD)
Electronic components can be destroyed by electrostatic discharge.
Hold circuit packs only at the edges or on the insertion and removal facilities. Always observe
the ESD instructions (please refer to the section
Bending radius
CAUTION
Risk of cable break
As a result of too small a bending radius, optical fiber cables may break.
To avoid cable break, ensure that the bending radius of optical fiber cables is not less
than 38 mm [1.5 inches] or 20 times the diameter of the cable (whichever is greater).
Overheating
CAUTION
Risk of fire due to overheating
Inadequate heat dissipation can cause heat accumulation or even a fire in the network
element.
You must therefore ensure that:
•
the fan unit is installed,
•
the individual fans are not obstructed.
............................................................................................................................................................................................................................................................
1 - 2 0
CAUTION
ESD hazard
Alcatel-Lucent - Proprietary
See notice on first page.
"Electrostatic discharge"
Installation
(1-15)).
365-312-878
Issue 3, June 2007
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
