NSK Varios 570 Bedienungsanleitung Seite 6

4-2 Connecting
Insert each plug into appropriate connector.
Connect Water Tube firmly into Water Tube
Connector.
Connect Foot Control firmly into Foot Control
Connector.
Connect AC Adaptor into DC Connector.
CAUTION
• Insert plugs firmly into the connector. Lose connection may be cause a malfunction.
• Ensure Power is OFF on the Control Unit during the AC Adaptor Connection. It may cause Fuse to blow.
• Do not connect the cord in wall outlet before connecting DC Connector.
• Do not pull the AC Adaptor forcibly.
• Do not disconnect the AC Adaptor while pressing on the Foot Control.
• Turn OFF the power to connect or disconnect the cords and plugs.
4-3 Disconnecting
4-3-1 Disconnect DC Plug and Foot Control Plug.
Simply pull out plugs from the Control Unit.
4-3-2 Disconnect Water Tube (Fig.2)
Pull out the Water Tube while pushing the
White Ring.
CAUTION
It requires the water removal before the Water tube disconnection.
5. Mounting and Removing the Handpiece
Align the Dots on the Handpiece and the Handpiece Cord. Push
handpiece into connector.
To remove the handpiece, grip the Handpiece and Handpiece
Code then pull out it stright. ( Fig. 3 )
WARNING
To avoid Electrical Shock Do not touch the handpiece
backend electrical contacts.
CAUTION
Always confirm that the handpiece is correctly seated and locked into place.
PUSH
White Ring
Handpiece backend
Handpiece
5
Fig.1
PULL
Water Tube
Fig.2
Dots
Handpiece Cord
Fig.3