roco multiMAUS PRO Handbuch Seite 79

"ROUTES" Menu
The multiMAUS uses the "ROUTES" menu to manage all data, which is required for the locomotive library and
PRO
for switching the corresponding turnouts.
4.1 "NEW"
Use this menu item to add a new route to the library. The sequence of steps is described and depicted in detail
starting on page 62 (Part 2, Chapter 2.7).
4.2 "EDIT"
Use this menu item to edit or supplement the data of a route stored in the library.
The first image shows the last route used while in route mode. Use the arrow keys to select the route to be
edited.
Confirm with "Light /OK."
▪
You now have the option of changing the route name. The insertion point flashes at the last slot. Use the left
arrow key to delete letters / numbers and reenter them using the function keys.
Confirm with "Light /OK."
▪
The first turnout saved in the route now is depicted.
Press the desired arrow key to change only the position of the turnout.
▪
Press the Shift and STOP key to delete the turnout.
▪
Skip any turnouts not to be edited by using the Shift and the right arrow key.
▪
The next turnout is reached with the key combination Shift and right arrow key.
▪
Once you have browsed through all turnouts of the route you can create one or several new turnouts. Please
▪
read Chapter 2.7.1 on page 62 for additional information.
If you do not wish to create a new turnout and all desired changes have been made, confirm with the "Light /OK"
▪
key. You are then returned to the "EDIT" start level.
4.3 "DELETE"
Use this menu item to remove a locomotive from the library.
The first image shows the last route used while in route mode. Use the arrow keys to select the route to be
removed.
Confirm with "Light /OK."
▪
The scrolling text „DELETE?" appears in the next screen.
Press "Light /OK" to confirm the deletion action again. This returns you to the "DELETE" start level, as indi-
▪
cated by the at the bottom of the display.
The route is now removed from the library.
4.4 "MODE"
Here you can set the multiMAUS
if you press the "Loco/Turnout" key, the respectively selected mode opens. Please read Chapter 2.7.2 on page
63 for additional information.
either to "ROUTES" or "TURNOUT" mode (confirm with "Light /OK".), i.e.
PRO
79