The "Settings" Menu - roco multiMAUS PRO Handbuch

The "SETTINGS" Menu

The most extensive multiMAUS
basic operation of the multiMAUS
vided with all the necessary settings in the factory so that you have to use this main menu either rarely or not at all.
3.1 "DISPLAY"
This is where you find the setting options which affect the display screen.
3.1.1 The sub-item "BACKLIGHT" regulates the strength of the backlight of the display screen which can be
particularly useful in dark rooms. You select the desired strength using the "arrow keys."
Value range: 0 (off) – 15, Factory setting: 8
To confirm the input, press "Light /OK" key. You return to the start level "BACKLIGHT."
▪
3.1.2 You use the second sub-item "CONTRAST" to regulate the contrast of the display screen. You also
select this value using the arrow keys.
Value range: 0 (very weak) – 15 (very dark), Factory setting: 12
To confirm the input, press "Light / OK" key. You return to the start level "CONTRAST."
▪
3.1.3 The "TIME" indicates how long the display is illuminated. To save power, the factory setting switches
the backlight off after 10 seconds. Use the arrow keys to select a different value:
Value range: 0 (backlight permanently off) – 255 seconds– always on
Factory setting: 20 seconds
Confirm input with "Light /OK." You are returned to the "TIME" start level.
▪
3.2 "USERINTERFACE"
You can make individual operating settings for the multiMAUS
3.2.1 Another language for the menu navigation is selected using the "LANGUAGE" submenu.
Select your language using the "arrow keys". If your national language is not included, visit the ROCO
website www.roco.cc for an update.
To confirm, press the "Light /OK" key. You return to the start level "LANGUAGE."
▪
3.2.2 The "MENU-KEY-TIME" is the amount of time you have to press the "MENU" key in order to exit drive
mode and access menu mode on the multiMAUS
using the "arrow keys."
Value range: OFF, 1– 10, Factory setting: 5
If the value is set to "OFF", you can only access the multiMAUS
key and the "Menu" key at the same time.
To confirm, press the "Light /OK" key. You return to the start level "MENU-KEY-TIME."
▪
3.2.3 The "FUNCTION KEYS" are used to activate locomotive functions (F1– F20, e.g. the horn on a locomo-
tive with sound or a digital coupling) by pressing the corresponding function key for an extended time
(at least 1 second). The function remains active for as long as you hold the "Function Key". If you press
the key only briefly, the desired function is activated normally.
You select the desired status using the arrow keys.
Value range: SWITCH, PUSHBUTTON, Factory setting: OFF
To confirm, press the "Light /OK" key. You return to the start level "FUNCTION KEYS."
▪
menu contains all the data which is practical, useful or sometimes necessary for
PRO
. We would also like to point out at this point that the multiMAUS
PRO
here.
PRO
. You can set the duration you require in seconds
PRO
menu mode by pressing the "Shift"
PRO
is pro-
PRO
75