Entering A New Locomotive - roco multiMAUS PRO Handbuch

Calling up other locomotives already entered in the library ("scrolling")
/
Locomotives in the library are sorted in the order in which they were entered. You can of course change this
order:
Select locomotive
These key combinations (press keys together) move the locomotive up or down in the library. You can check the
new order for the library with the arrow keys.
2.2.2 Entering a new locomotive (in the example, the DR 120 series "Taigatrommel" diesel locomotive):
Display message
54
54
+
Input
/
+
or
Comment
You can find the free memory slot marked
"NEW ?" by scrolling through the library
using the arrow keys.
Confirm by pressing "OK."
You then enter the locomotive name. 5 char-
acters are available. In our example we have
abbreviated "Taigatrommel" to "TAIGA."
The first character is displayed with a flash-
ing cursor.
You use the "function keys" 1 –0 to make the
input in the same way as writing a text mes-
sage on a mobile phone: Press the respec-
tive key repeatedly until the desired charac-
ter appears. The cursor flashes and freezes
briefly after the correct character has been
entered before jumping to the next charac-
ter place.
To enter a space, press the "0" key once, to
get the "0", press the key twice. Special char-
acters (/, –, \, , [ , ], ‹, ›) can be entered
✱
by repeatedly pressing the "1" key. Correct
input errors by using the left "arrow key" to
move back one or more spaces.