Connections And Connection Options - Medion MD80410 Bedienungsanleitung

DVD-Porty 2TFT MD80410 D EN DK E.book Seite 13 Montag, 4. April 2005 12:56 12
C
ONNECTIONS AND CONNECTION OPTIONS
To use the DVD player it only has to be connected to the
electricity and to one or both of the connected
monitors.
You can connect the DVD player via the mains plug to
a 230 V plug or with the 12 Volt adapter cable to a 12V
plug.
However, the device can be connected in various ways
to other input and output devices:
! to a television
! to a video recorder
! to a receiver, e. g. stereo system
Make sure that all devices are switched off before
connecting them. Only connect the units to the
mains when the other connections are complete.
Power connection
If you want to connect other devices you should
make these connections before connecting the
DVD player to the mains.
Connection with mains adapter
! Insert the device plug for the supplied mains
adapter into the device connection socket DC IN 12V
on the side of the device (1).
! Connect the mains cable to the mains adapter and a
plug (2).
Connect with 12 V car adapter
! Insert the device plug on the 12 V car adapter into
the device connection socket DC IN 12V
on the side of the device.
EN
EN-13