Operation - cecotec CONGA 1090 Serie Bedienungsanleitung

ENGLISH
1. Install both side brushes to the slots located on
the bottom part of the robot. Press until it clicks to
make sure they are properly fixed..
2. Place the robot on the charging base and make
sure the charging terminals on the robot match
with those of the charging base. Once the robot is
properly, emitirá un pitido y el botón
turn on, indicating that the robot is ready for use.

4. OPERATION

Start cleaning
• Press the power button
• Press the power button
control to start cleaning.
WARNING: if the charging base is not accessible, the robot will not be able to return to its char-
ging position. In that case, once the robot has stopped, take it manually to the charging base.
Pause
• Press the power button
process.
• Press the power button
process.
• Press back-home button on the robot or on the remote control to send the robot to the
charging base.
Turn off
• Long-press the
• WARNING: The robot includes a power switch ON/OFF in the centre of the product's
main body. As a safety measure, if the switch is on OFF, the initial default parameters
will be set. If we want the robot to operate in time-scheduling mode, the switch must be
set at ON, if not, it will have to be scheduled again from the remote control.
22
button will
on the robot to start up the robot.
on the robot again or the auto button
on the robot or on the remote control to pause the cleaning
on the robot or on the remote control to resume the cleaning
button to turn the device off.
on the remote