Before Use; Operation; Cleaning And Maintenance - cecotec CONGA THUNDERBRUSH 690 Bedienungsanleitung

ENGLISH

4. BEFORE USE

1. Take the product out of the box and remove all packaging materials.
2. Make sure the device is in good conditions and allow it to fully charge for 3 hours before
the first use.
3. Select the desired accessory according to the area yo desire to clean.

5. OPERATION

1. Press the
Press the +- button to select the appliance's suction power. Select between Eco mode (-)
2.
or Turbo mode (+).
3. Empty the dust tank after each use. (See "Cleaning and maintenance").

6. CLEANING AND MAINTENANCE

Main body
• Turn the product off before cleaning or repairing.
• Empty and clean the dust tank after each use. Press the dust tank cover release button to
open it. Once it is empty, make sure it is properly closed before storing or using it again.
• Use water and neutral soap to clean the product's housing. Do not allow water or any li-
quids to come inside the vacuum cleaner's electric components.
• Do not dry the appliance under direct sunlight, use a soft cloth or tissue paper.
Dust tank and filters
The dust tank has a transparent housing which allows controlling the tank's inside.
22
CONGA THUNDERBRUSH 690 IMMORTAL BATTERY 22,2 V
05125_ThunderBrush 690 Inmortal Battery 22,2 V_Manual.indd 22
button to turn the appliance on, and press it again to turn it off.
13/12/18 17:45