Care And Maintenance - Clatronic DVD 534 HC Bedienungsanleitung

DVD 534 HC - GB 25.06.2002 10:00 Uhr
Dual-mono-sound
In some recordings, the contents of the right and the left
sound track are different. For example, the original sound
track (possible English) may be on the right channel and
the simulcast sound track (possibly German) may be on
the left channel. In DUAL MONO, playback of these chan-
nels can be adjusted as required.
SETUP MENU DOLBY DIGITAL SETUP
Select with the » / « 21 buttons...
STEREO, when both channels are played back separate-
ly ("stereo").
L MONO or R MONO, when playback of the left or of the
right sound channel is to be made over both front
speakers (e.g. with separate languages).
MIX MONO, in case of mixed playback of both channels.
Confirm the setting with »ENTER« 21. Press »SETUP«
button 20 to quit the menu.
Note:
This setting is only possible when recordings are played
back in Dolby Digital.
Cleaning the components
Before cleaning, switch off the DVD receiver and unplug
the subwoofer from the mains. Clean all components using
a wet cloth or a little synthetic cleaner. Solvents, spirits,
dilutents, etc. can damage the surface of the device.
Notes about compact disc (DVD video
CD, video CD, audio CD, MP3 CD)
Always keep the CD in its cover and touch the edges on-
ly. The surface shimmering in rainbow colours must not
be touched and should always be kept clean. Do notstick
paper or adhesive tape onto the labelled side of the CDE.
Keep the CD away from direct sunlight and heat sources
such as heating.
A CD must also never be left in a car parked in direct
sunlight as the temperature inside the car gets very high.
Clean the CD with a cloth before playing it. Do not use
any solvents such as petrol, dilutions or other detergents.
Clean the CD in a straight line from the centre outwards.
Never clean the CD using circular cleaning movements.
48
Seite 48
Sound dynamic range
In some situations it can be uncomfortable if the sound is
very loud. To avoid this, the loudest positions must be
compacted. In the same way, very quiet passages are al-
most inaudible and must therefore be made slightly lou-
der.
Dolby Digital allows you to make these adjustments using
DUAL MONO the "Dynamic Range Control".
SETUP MENU
Select with the » / « 21 buttons...
8/8 to 1/8, if the dynamic ranges are to be entirely or par-
OFF, to switch off this automatic control.
Confirm the setting with »ENTER« 21. Press »SETUP«
button 20 to quit the menu.
Note:
This setting is only possible when recordings are played
back in Dolby Digital..

Care and Maintenance

Notes about the CD player
If the CD player is not being used, the CD tray should al-
ways remain closed to protect the mechanism against
dust. However, it is still possible that the lens becomes
dirty from dust or is covered by a thin, hardly visible, film.
The CD system is then no longer able to scan the inser-
ted CD. In this case you need to have the lens cleaned by
a technician.
Maintenance
Electronic components are subject to a natural ageing
process. The mechanical parts are subject to normal we-
ar. Dust Particles inside the device may also cause faults
to occur, e.g. due to dirtying of the laser lens. Consult
your authorised dealer in the case of any faults. For trans-
porting the set use the original packaging only.
Caution!
The device is powered by dangerous voltage. The set
may therefore be opened by authorised specialists only.
All maintenance and service work must be carried out
by authorised companies only. Inexpert repair work may
endanger the operator's life.
.
Any work on the set done by non-authorised persons on
their own account causes the guarantee to expire.
Note:
To help identifying the device in case of after-sales servi-
ce, always mention the number of the ID on the inscripti-
on plate on the rear of the device.
DOLBY DIGITAL SETUP
tially compacted.
DYNAMIC