Clatronic DVD 534 HC Bedienungsanleitung Seite 35

DVD 534 HC - GB 25.06.2002 10:00 Uhr
Putting into operation and basic functions
Menu functions
All operations of the DVD operating mode are shown on
the screen in »MENU-Form« for simpler operation.
Various languages can be selected for the menu. To set
the menu language, please refer to the »Basic settings«
section on page 35-37.
In all menus, the selections and the settings are made
using the buttons »
firmed by pressing »ENTER« 21.
The BASS-MODE option, for example, is explained as
follows...
SETUP MENU SPEAKER SETUP
...then these operating Steps are to be carried out.
– Press the »SETUP« button 20, the main menu
appears on the screen.
– Use the » « button 21 to select the line SPEAKER
SETUP.
– Call up the SPEAKER SETUP PAGE by pressing the
»ENTER« 21 button.
– Use the » « button 21 to select BASS-MODE
– Press the » « button, the marking now switches to
the right side of the menu into the set-up mode.
– Highlight the required setting using the » / «
buttons.
– Confirm the setting using the »ENTER« button 21.
– To leave the menu, press the »SETUP« button 20.
If there is SETUP menu on the screen then the other
device functions
I If a command can not be executed because, e.g.
the CD does not contain a given piece of informati-
on, then this symbol appears on the top left corner
of your screen.
Switching the device on and off
Switch on the television. If the DVD receiver is connected
to the television by SCART then switch over to the
respective Scart input if necessary.
If the DVD receiver is connected to the television via the
VIDEO or S-VIDEO socket then the corresponding video
input must be selected at the television.
Switch on the DVD receiver with the »POWER« button 6.
Display 10 of the DVD receiver now lights up and you are
prompted an the television screen to insert a CD. If a CD
has already been inserted then the device automatically
starts to play it back on switching on.
Switch the device to standby mode by pressing the
»STANDBY« button 14 LED 7 lights up now. Re-pressing
»STANDBY« button 14 or »SOURCE« button 13
switches the device back on from standby mode.
The device is switched off completely by pressing the
»POWER« switch 6.
Seite 35
/ / / « 21. The setting is con-
BASS MODE
Note: Depending on the reception conditions of your tele-
vision, it is possible that there is disturbance to the pictu-
re when watching normal television. In this case, switch
off the DVD receiver using the »POWER« button 6.
Selecting the operating mode:
For playback of picture and sound, the corresponding
operating mode must be selected. The respective opera-
ting modes can be selected directly using the buttons
»DVD«, »TUNER« or »AUX« 28. The individual operating
modes are run through by pressing the »SOURCE« but-
ton 13.
DVD Playing-back from the built-in DVD compact disc
Player
TUNER Radio operation selecting the frequency band
AUX 1 Playback from a device connected to one of
AUX 2 the »AUDIO IN AUX 1/2« sockets 53.
Display 10 is used for control purposes..
FL C
Pro Logic
Setting the volume
By pressing the »ADJ/VOL. +/-« buttons5/41, you can set
the volume as desired.
To switch off the sound, press the »MUTE« button 37on
the remote control. The »STANDBY/MUTE« 7 display
flashes. .
On re-pressing this button or one of the »ADJ/VOL +/-«
5/41 the sound is switched back on.
Basic settings
The following settings only need to be carried out once
before putting the system into operation for the first time.
Before changing the basic settings (in the General Set-
up), check which corrections are required based on the
following table.
Menu display:
Menu language OSD LANG
TV standard TV TYPE
Audio output AUDIO OUT
Video output VIDEO OUT
Menu language (OSD LANG):
Select between GERMAN, ENGLISH, FRENCH,
ITALIAN, and SPANISH
TV-Standard (TV TYPE):
The TV standard (colour system) is listed in the tech-
nical specifications of your television. Adjust the DVD
receiver accordingly (MULTI, NTSC, PAL). The TV
standard of the DVD receiver can also be switched
over manually at any time (when there is no menu on
the screen) using »N/P« button 35.
FR SR SL Sub
Nor
Factory setting:
ENGLISH
MULTI
ANALOG
CVBS
35