In-1 Cordless Impact Drill Psbsa 20-Li B2; Introduction; Intended Use; Features - Parkside PSBSA 20-Li B2 Originalbetriebsanleitung

3-IN-1 CORDLESS IMPACT DRILL
PSBSA 20-Li B2

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .

Intended use

This appliance is intended for screwing in and
removing screws as well as drilling in wood, metal,
ceramic and plastic and impact drilling in bricks
and masonry . It is not suitable for impact drilling
in natural stone such as granite . The light on this
appliance is intended to illuminate the immediate
work area of the appliance .
Use this product only as described and for the
areas of applications specified . The appliance is
not intended for commercial use . Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse .

Features

Speed selector
Rotation direction switch/lock
ON/OFF switch / Speed control
Bit
Battery charge level button
Battery display LED
Battery pack
Release button for the battery pack
LED work light
Additional handle
Chuck
Torque preselection ring
High-speed charger
Red charge control LED
Green charge control LED
■ 2 │ GB │ IE │ NI │ CY

Package contents

1 3-in-1 Cordless Impact Drill PSBSA 20-Li B2

1 high-speed battery charger PLG 20 A1
1 battery pack
1 additional handle
2 bits PZ1 & PZ2 (50mm)
1 carrying case
1 set of operating instructions

Technical data

3-in-1 Cordless Impact Drill: PSBSA 20-Li B2
Rated voltage:
Gearbox:
Rated idle speed:
Hammer frequency:
Max . torque:
Torque levels:
Chuck capacity:
:
Max . drill diameter:
Battery: PAP 20 A1
Type:
Rated voltage:
Capacity:
Cells:
High-speed battery charger: PLG 20 A1
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 62841 . The A-rated noise level of the
power tool is typically as follows:
20 V (DC)
2 speed gearbox
1st gear: n 0–440 rpm
0
2nd gear: n 0–1650 rpm
0
0–26400 bpm
45 Nm
1–20 + 1 drill level /
+ 1 hammer level
Ø max . 13 mm
30 mm for wood
15 mm for tiles
13 mm for steel
LITHIUM ION
20 V (DC)
2 Ah
5
230–240 V ~ , 50 Hz
(AC)
65 W
T3.15A
3 .15 A
21 .5 V (DC)
2 .4 A
approx . 60 min
II / (double insulation)
PSBSA 20-Li B2