Specifications - Vitek VT-1645N GY Betriebsanweisung

ENGLISH
• If the blade does not rotate or rotates with difficulty, disconnect the device from the power network
and check up for foreign objects present in the bowl, if there are any – remove them.
• If the blade does not quickly reach the maximum speed, remove part of the products from the bowl,
having disconnected the device from the power network before that.
• If you need to mix products in the bowl, use a suitable plastic spatula for that purpose. Never mix
products with hands!
• Uniform processing of products is attained by loading the product slices of identical size.
• It is forbidden to add boiling liquids into the chopper bowl.
• Do not switch on the device with an empty chopper bowl.
cLeAninG
Before cleaning, disconnect the motor unit from the power network.
Wipe the motor unit with a damp fabric. It is forbidden to immerse the motor unit in water or other
liquids.
Do not use abrasive cleaning substances or mops with a rough surface.
After using the chopper, wash out the bowl and the cover in warm soapy water, rinse and wait until
they are fully dry, and then start assembling the device. Remember, the remains of water can lead to
the formation of mold.
When processing products with high coloring power (for example, carrots, beet), plastic parts of the
device can be colored; you can remove the color with a fabric moistened in vegetable oil.
cleaning of chopping blades
Caution: the blades are very sharp.
To avoid traumas, wash the blades under a jet of water separately and always hold them in sight.

specificAtions

AC power voltage: 220-240 V ~ 50/60 Hz
Maximum power: 400 W
Continuous operation time: 10 secs of operation / a break for the motor cooling down.
Specifications subject to change without prior notice.
MINIMUM SERVICE LIFE - 5 YEARS
GUArAntee
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/ЕС and to the Low Voltage
Regulation (2006/95/ЕС)
1645.indd 6
6
26.11.2013 16:12:56