Set Frequency And Cancel Timing; Day-To-Day Storage; Maintenance; The Host Cleaning - ECOVACS ECO D56 Bedienungsanleitung

►Make sure the socket is connected to power supply. Or else, robot will fail to work on
appointment time under standby status because of running out of battery.

Set Frequency and Cancel Timing

Tips:
►Robot will turn to the automatic mode when the appointed time coming.
►If the robot is working under border mode or fixed-point mode, when the appointment time
coming, it will not operate appointment cleaning until the next time coming.
You can set appointment cleaning frequency via press
then release
to clean on appointment time for one time
to clean on appointment time everyday here after.
to cancel appointment timing, robot only works
upon your manual operation

9. DAY-TO-DAY STORAGE

10. MAINTENANCE

The Host Cleaning

ENG - 104
• You should keep robot stay at charger even though it finishes
charging and cleaning task, because it will change to small
currency to supplement charging.
• Charge the robot until full battery and put it back to the pac-
kage if you do not need to use it for long time(at least over three
months). Keep the package in dry surroundings to avoid sunshine
or humidity.
• Turn off the power before cleaning the host
• Draw out the plug of charger before cleaning the block.
• Do not use petrol or oil-like to clean the surface, while you can
use water or neutral detergent to scrub. Make sure you use dry
cloth to wipe, because any water is not allowed to infiltrate into
the machine.