Cycle Cleaning; Set Cycle Cleaning; Cancel Cycle Cleaning - ECOVACS Deepoo ECO D54 Bedienungsanleitung

9. CYCLE CLEANING

Set Cycle Cleaning

Cancel Cycle Cleaning

ENG - 94
If you need the robot to work in the fixed time every day,
please set the procedure as belowing instruction:
Turn on the power button, then press the
will work according to the AUTO mode till it show the low
battery and go back to charging.
• The time you press the
work at that time next.
• If you set the Cycle Cleaning,
• After you set the cycle cleaning, please do not choose ano-
ther mode, and also not press
function will be canceled. If want to pause the robot, press any
button (except power button). However, when you need to restart
the robot, please still press
Press any button will cancel the cycle function.
• After set the cycle function, if you need the robot return to
charging, please pause it at first, and move it to the charging
block manually. Do not press the
the cycle function.
• If you turn off the robot, although you have set the Cycle
Cleaning, the robot will not work when the setting time coming.
• Please make sure the charging block have connected with
the electrical source, otherwise, robot will not work due to the run
out of the battery, even it is in the standby status.
If you need to cancel the cycle function:
Method One: Turn off the power and restart the robot; the cycle
function will be canceled.
Method Two: During the working status, press any button (ex-
cept power button) to pause the robot, and then press
or or button, the cycle function will be canceled.
button, robot
button, then robot will start to
indicator will light on.
button, otherwise, the cycle
button.
button, which will cancel