ECOVACS ECO D56 Bedienungsanleitung Seite 113

11) Why robot is not charging as it is put
in the charger? The charging indicator
does not light as well.
Answer:
a. Examine whether the battery at the
bottom is installed in place, if cover
screw is loose, you need to fasten it.
b. Check if there is power supply for
the socket.
c. Please contact our
after-sales service when the failure
is still there.
12) Would it be difficult for robot to clean
the corner as it is a round design?
Answer: Robot can detect wall by itself.
It is able to clean along the edge of wall
under automatic and border cleaning
mode. Its side brush can remove dust
along bottom edge efficiently; there would
be dust beyond robot in the tiny area
formed by two walls which need to be
removed by hand..
13) Why does the speed of robot slow
down sometimes?
Answer: When robot detects there is much
garbage and dust on the floor, it would
turn to low speed proceeding
automatically.
14) Is there any danger to furniture
and child when robot is proceeding?
Answer: No. There is a soft rubber
buffer made of PPC in front of the host.
It would try other route once it touches
furniture or child.
15) Would robot affect pet?
Answer: Robot makes low noise when
operating, so there would be no shrill
sound which may cause pet restless
or even distrust. If you keep pet at
home, we suggest you to notice
the first time the robot operating.
16) What should be noticed when cleaning
the carpet?
Answer: Robot is not able to clean long
hair over 2 centimeters. Fold the banding
first when you start cleaning.
17) Does it matter to keep the robot at
the charger when not using it?
Answer: Yes. Robot will transfer to
small currency to supplement charging.
Please avoid wrong operation by child.
18) Is there any danger to wrongly touch
the docking electrode film between
the host and charger?
Answer: No. The two electrodes of
charger is of no voltage under output
mode(when there is no power supply);
it's maximum voltage is 24V which is
safe one under input mode(when it is
charging)
19) How does main brush avoid being
tangled by power cord?
Answer: Robot is probably get tangled
by the wire scattered on the floor when
it is operating. At that time, robot will
try to turn back to get rid of it, and it
will make alarm sound when it fails
after trying several times.
20) How can I stop the robot from operating
on appointment time since I will be
away from home for sometime?
Answer: You can cancel appointment
cleaning. Refer to page stránka 103.
ENG
Enjoy smarter life
ENG - 113