OLI MVE J Serie Handbuch Seite 64

MVE
C
Please specify the following for requests of spare parts:
- Type of motovibrator
- motovibrator series
- Power supply voltage
- Description of the spare part and drawing position number.*
* Contact OLI to check whether it is actually available.
Any work on the electric motovibrator must be carried out by specialised personnel and equipped with designated PPE. Ensure the machine
has been made safe before conducting work on it.
REFERENCE TO DRAWINGS IN THE TAB. SECTION FROM PAGE TAB.131 TO PAGE TAB.134
Pos. DESCRIPTION
1 Motor casing
2 Bearing-holder flange
3 Exposed conductive parts cover
4 Shaft – rotor
5 Blade exposed conductive part
5a Fixed exposed conductive part
5b Mobile exposed conductive part
6 Bearing spacer
7 Exposed conductive part spacer
8 Bearing
Exposed conductive parts cover
9
O-ring
10 Nut
11 Cover screw washer
12 Cover screw
13 Wound stator
14 Cable gland
15 Terminal board cover O-ring
16 Terminal board cover
17 Terminal board cover washer
18 Terminal board cover screw
19 Terminal board
Exposed conductive parts retainer
20
Seeger ring
REV.01 | 01/2019
CM
US
Intertek
SPARE PARTS
Pos. DESCRIPTION
Exposed conductive parts adjustment
21
disc
Exposed conductive part screw
22
washer
23 Exposed conductive part screw
24 Feather key
25 Identification plate
26 Flange washer
27 Flange screw
28 Grease ring seal
29 Grease Seeger ring seal
30 Lubricator
31 Anti-rotation plate
3
R. 64