OLI MVE J Serie Handbuch Seite 62

MVE
C
_ _ _ _ _ _ _ _
MVE
serial number:
........
YY X
serial number: Refer to the last page of the manual
with the requirements of the EU directives and subsequent amendments:
- ATEX directive 2014/34/EU of 26 February 2014
Compliance has been verified based on the requirements of the standard or regulatory documents below:
EN 60034-1, EN 60079-0:2012/A11:2013, EN 60079-31:2014
Ex II 2D Ex tb IIIC Tx Db IP66
0359
Ex tb IIIC Tx Db IP66
ITS17ATEX102020X
IECEx ITS 17.0030X
-20°C≤Ta≤+55°C
In accordance with machinery directive 2006/42/EC, the above-mentioned range of external motovibrators are identified as 'PARTLY-COMPLETED MACHINERY' .
"B" Type:
» These products are built in accordance with directive 2006/42/EC and SUBSEQUENT AMENDMENTS.
» These products must not be put into service until the final machine in which they are to be incorporated has been declared compliant with the provisions of
this Directive as required.
» The protection requirements of directive 2014/35/ EU have been met with reference to appendix I No 1.5.1 of machinery directive 2006/42/EC
In accordance with annex IIB of machinery directive 2006/42/EC, the following essential safety and health requirements are applied and complied with:
1.1.1. - 1.1.2. - 1.1.3. - 1.1.5. - 1.3.1. - 1.3.2. - 1.3.3. - 1.3.4. - 1.3.7. - 1.3.8. - 1.3.9. - 1.4.1. - 1.5.1. - 1.5.2. - 1.5.4. - 1.5.5. - 1.5.6. - 1.5.7 - 1.5.8. - 1.6.1. - 1.6.4. - 1.7.1. - 1.7.2. - 1.7.3. - 1.7.4. - 1.7.4.1. - 1.7.4.2. - 1.7.4.3.
The relevant technical documentation has been filled out in accordance with annex VII B. OLI S.p.a. undertakes to send by mail or e-mail, in response to a reasoned request by the
national authorities, relevant information on the products covered by this declaration, without prejudice to the intellectual property rights of the manufacturer. The information will be
transmitted directly to the national authority that requested it. The technical documentation is held by OLI SpA, Via Canalazzo, 35 – 41036 Medolla (MO) Italy
Medolla 04/04/2017
REV.01 | 01/2019
CM
US
Intertek
Via Canalazzo, 35 – 41036 Medolla (MO) – ITALY
Declares that
the range of external electric motovibrators:
_ _ _ _ _ _ _ _ _
Progressive no. (1...999999).
Commissioning line (A...Z)
Year (2016, .....)
complies with the directives listed in the following declarations
EC DECLARATION OF CONFORMITY
DECLARATION OF INCORPORATION
®
OLI SPA
®
-100A- / -105A- / -110A- = Size of the motovibrator and bore
(Full list of the models in the TAB section)
--- = Motovibrator series (Empty foot range motorvibrators)
H = Certification
15 = 1500 max rpm – 18 = 1800 max rpm
1 =1000 max rpm – 12 =1200 max rpm
075 =7 50 max rpm – 090 =950 max rpm
Max CF from 11779 to 26489 kg. For the US market from 25968 to 58398 Lb (three-phase
motors)
Internal code: Electric motovibrator
2
M. 62
4 = 4 poles (1800 rpm)
For the
6 = 6 poles (1200 rpm)
US market
8 = 8 poles (900 rpm)
Giorgio Gavioli
(the Legal Reppresentative)