Identification Plate; Transport And Packaging - OLI MVE J Serie Handbuch

MVE
C
!
SAFETY RECOMMENDATIONS FOR TRANSPORT AND HANDLING
Carry out all the handling and transport operations according to the procedures and instructions shown on the packaging and the supplied
manual (page TAB.190 - page TAB.191).
All operations must be carried out by qualified and authorised personnel.
Persons authorised to carry out handling operations must have specific skills and experience and implement all necessary measures to
ensure their safety and that of persons directly involved.
The choice of lifting and handling equipment (cranes, gantries, forklifts, etc.) must take into account the weight to be moved, the size and
gripping points.
Only accessories such as eyebolts, hooks, shackles, spring catches, bands, slings, chains, ropes, etc. certified and suitable for the weight to
be lifted are to be used during lifting stages.
During the handling stages, comply with the requirements applicable to the handling of the loads.
Keep the set-up of the machine or of the sections and loose components horizontal. Keep the load low and slowly perform all the
necessary movements.
Avoid abrupt, dangerous oscillations and rotations. If necessary manually accompany the movement and gently place the load on the
ground.
CHECKS BEFORE SHIPMENT
Avoid any kind of damage during unloading and handling. To this end, lift the packaging as indicated in the following manual (page
TAB.190 - page TAB.191). DO NOT PUSH OR DRAG the electric motovibrator! Bear in mind that this is mechanical/electric material that must
to be handled with care.
As an anchorage mode during transport, the packaging of the motovibrator must be firmly anchored to the loading platform of the vehicle
to prevent movements and collisions that might damage some parts. Moreover, the loading platform must be clear of any free bodies that
might damage them due to shocks.
Upon receipt of the goods, check whether the type and quantity match to the information in the order confirmation.
Any damage must be immediately reported in writing in the designated area of the consignment note. The driver is required to accept
this complaint and leave a copy of it with you. If the supply is FOB, send your complaint to the manufacturer or, otherwise, directly to the
shipping agent.
If you do not claim damages immediately upon arrival of the goods, your request might be rejected.
The installer is responsible for suitably disposing of the packaging in accordance with applicable laws in force.
CM
US
Intertek

2.2 - TRANSPORT AND PACKAGING

WARNING
STICKER
IDENTIFICATION
PLATE
!
REV.01 | 01/2019
2
M. 47