Contraindications For Use; Warnings - OLI MVE J Serie Handbuch

MVE
C

CONTRAINDICATIONS FOR USE

There is no contraindication for use if the usual precautions for this kind of product are followed, along with the instructions in this manual.
It is also forbidden to operate the motovibrator before the machine/plant has been declared
compliant with the provisions of directive 2006/42/EC
In this regard, the plant/engineer installer is required to set up and install all the devices/protections in order to avoid damage to property
or injury to people in case of failures and subsequent fall of pieces.
Before going ahead with the installation of the electric motovibrator, the plant engineer/installer must check if the ordered model matches
the model owned (values reported on the rating plate) and that it has not undergone damage during transport or has any faults.
The electric motovibrator must be installed in accordance with the instructions of this manual by the plant engineer/installer, who must
take care of the following: operating test, adjustment and check to ensure it is positioned correctly. Any disassembly and assembly of parts
of the electric motovibrator must be carried out only for the purposes of maintenance or cleaning and can be carried out only be qualified
personnel authorised for these operations. The necessary instructions for the assembly and disassembly of some parts of the electric
motovibrator are enclosed with the user manual.
Before conducting any work on the electric motovibrator, ensure it has been made safe.
IMPORTANT: later in this manual we will use the sentence "ensure the electric motovibrator and
the equipment on which it is installed are safe" for the following operations:
-Before carrying out any maintenance, ensure the machine is safe, as operating inside the
terminal board box of the electric motovibrator is dangerous. This means the power supply
must be turned off via the master switch.
PLEASE NOTE Do not intervene on the electric motovibrator itself during the operation of the
equipment on which the electric motovibrator is installed (e.g. vibrating bottom, sieve, etc.).
If the equipment is controlled from a main panel, the latter must have a safety key to prevent
accidental start-ups and the key must be held by the person conducting maintenance.
Ensure the area around the electric motovibrator is lit correctly (if necessary, give operators suitable electric lamps for:
- Zone 21 cat. II 2 D for ATEX and IECEX environments, C22.1 art.18 CEC.
- Class II Div.2 (NEC 500.5)
Before conducting work on the electric motovibrator, carefully remove the layers of dust settled on it by only using a damp cloth, whilst
making sure you do not spread the dust around. For any operation to be carried on the electric motovibrator (maintenance and cleaning),
operators must have the designated personal protective equipment (PPE):
- Antistatic safety footwear (certified)
- Antistatic protective clothing (certified)
- Antistatic cut-resistant gloves
- Protective masks
- Protective goggles
CM
US
Intertek
1.5 – WARNINGS
! !
REV.01 | 01/2019
1
T. 39