Storage - OLI MVE J Serie Handbuch

MVE
C
1) STORAGE BEFORE INSTALLATION
- Avoid damp and brackish environments wherever possible.
- Place the electric motovibrator on wooden platforms and away from the elements (do not stack it).
- Storage outdoors or in the areas where vapours or substances not compatible with the materials used to build the electric
motovibrator (also poorly corrosive substances) is prohibited.
- Avoid storage conditions below -20°C.
2) PROLONGED MACHINE INACTIVITY AFTER ASSEMBLY
Before putting the machine into service:
- Ensure the electric motovibrator is safe.
- Ensure all the parts for which prolonged inactivity can affect operation are intact.
3) POSSIBLE RESTART AFTER A PERIOD OF INACTIVITY
- Avoid damp and brackish environments when storing the vibrator.
- Place the electric motovibrator on wooden platforms and away from the elements.
- Storage outdoors or in the areas where vapours or substances not compatible with the materials used to build the electric
motovibrator (also poorly corrosive substances) is prohibited.
Before putting the machine into service:
- ensure the electric motovibrator is safe.
- Ensure parts for which prolonged inactivity can affect operation are intact.
- perform a full cleaning cycle in accordance with the safety data sheet of the dust processed by the system.
If the electric motovibrator operates under different conditions and with different materials, check if this use is compatible with the
instructions reported in section 1.3 - OPERATING INSTRUCTIONS.
CM
US
Intertek

1.7 - STORAGE

1
T. 41
REV.01 | 01/2019