Description; Nomenclature - OLI MVE J Serie Handbuch

MVE
C
2
3
1
5 6
7
MVE motovibrators are designed and built in accordance with the following directives and regulations:
- directive 2014/34/EU in accordance with category 2D and directive 2006/42/EC
- regulations UL 1004-1,UL 1004-3, UL60079-31, UL60079-0,IEC 60034-1, IEC EN 60079-0, IEC EN 60079-31, CSA 60079-0, CSA 60079-
31, CSA 22.2 NO.100, CSA 22.2 NO.77
The general features of motovibrators of the MVE series are listed here below:
- Insulation class F
- Tropicalisation as standard
- IP66 protection rating.
- Operating temperature from:
J - Amb.Temp. -20/+40°C
H - Amb.Temp. -20/+55°C
E - Amb.Temp. -20/+40°C
J
H
E
CM
US
Intertek

1.2 - DESCRIPTION

8 4

1.3 - NOMENCLATURE

Certification
II2 D Ex tb IIIC Tx Db IP66
II2 D Ex tb IIIC Tx Db IP66
II2 D Ex tb IIIC Tx Db IP66
CM
Class II Div 2 Group F,G T4
C US
Intertek
Pos.
1
2
3
4 Bearing-holder flange
5
6
7 Exposed conductive parts
8
Ex tb IIIC Tx Db IP66
T.Amb -20/+40°C
Ex tb IIIC Tx Db IP66
T.Amb -20/+55°C
Ex tb IIIC Tx Db IP66
Ex tb IIIC Tx Db IP66
T.Amb -20/+40°C
T. 37
Description
Vibrator Body
Terminal board
Cable gland
Stator
Rotor shaft
Bearing
REV.01 | 01/2019
1