Zhermack California Bersetzung Der Originalbetriebsanleitung Seite 19

california
Translation of the original operating instructions
1. INTRODUCTION
1.1 How to read and use the Use an Maintenance Manual
1.2 Terms and symbols used
2. GENERAL INFORMATION
2.1 Liability
2.2 Warranty: general standards
2.3 Authorised staff
2.4 General safety provisions
3. DESCRIPTION OF THE EQUIPMENT
3.1 General description of the equipment
3.2 Description of the components
3.3 Identification data
4. TECHNICAL FEATURES
4.1 Technical features and functioning principle
4.2 Technical data
4.2.1 Standard supplies
4.2.2 Accessories available on request
4.2.3 Weight and overall clearance
5. TRANSPORT AND HANDLING
5.1 General warnings
5.2 Packaging and unpacking
5.3 Transport and handling
5.4 Disposal/Dismantling
6. INSTALLATION AND COMMISSIONING
6.1 Warnings and precautions
6.2 Accepted environmental conditions
6.3 Space necessary for use
6.3.1 Worktop
6.4 Power source connection
6.5 Start-up
6.6 Using the extractor
6.7 Declared use
6.8 Non-declared and prohibited use
7. USING THE EQUIPMENT
7.1 General warnings
7.2 Safety system
7.3 Use of the equipment
7.3.1 Using the selector switch
7.3.2 Stages of work
7.3.3 Tank cover opening
7.3.4 Assembly of optional additional tank
7.3.5 Assembly of optional additional nozzles
7.3.6 Changing the glass / LED-holder protective film
7.4 Residual risks
8. MAINTENANCE
8.1 Cleaning the equipment
8.1.1 Cleaning the inside of the sandblasting equipment
8.2 Cleaning the equipment
8.3 Extraordinary maintenance
8.4 Re-start after long period of inactivity
8.5 How to request after-sales assistance
9. DIAGNOSTICS
9.1 General warnings
9.2 Troubleshooting
10. ATTACHMENTS
10.1 CE Declaration of Conformity
10.2 Warranty certificate and Identification form
10.3 Technical intervention worksheet
The data given in this Manual can undergo variations without forewarning.
The reference figures are present on pages 3, 4, 5, 6, 7 and 8 of this manual.
INDEX
19
EN