Notes On Safety; Symbols In The Manual; Explanation Of Symbols; General Notes On Safety - FLORABEST FTP 400 D3 Originalbetriebsanleitung

Notes on Safety

Symbols in the manual

Warning symbols (the danger
can be explained at the place
of the exclamation mark)
with information on damage
and injury prevention.
Instruction symbols (the instruction
can be explained at the place of
the exclamation mark) with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.

Explanation of symbols

Caution! Not suitable for water
with a high sand content!
Read and follow the operating in-
structions provided for the device!
Attention: Remove the plug from the
socket as soon as the power lead is
damaged or cut.
Greatest possible operating immer-
sion depth.
7 m
Electric appliances should not be
disposed of in the domestic gar-
bage.

General notes on safety

This section deals with the basic safety
regulations to be observed when working
with the machine.

Working with the equipment:

Caution: to avoid accidents and in-
juries:
• People who are unfamiliar with the
operating instructions are not permitted
to use the equipment. Local regulations
or bylaws may determine the minimum
age for using the device.
• Wear sturdy footwear to protect against
electric shock.
• Should there be people in the water,
do not operate the equipment. Risk of
electric shock!
• Take appropriate measures to keep chil-
dren away from the equipment whilst it
is running. There is a risk of injury!
• Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• The transportation of aggressive, abra-
sive (grinding effect), corrosive, com-
bustible (e.g. motor fuels) or explosive
liquids, salt water, cleaning agents and
foodstuffs is not permitted. The tempera-
ture of the liquid being transported must
not exceed 35°C.
• Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not work with damaged or incom-
plete equipment, or with equipment that
has been converted without the approv-
al of the manufacturer. Before initial op-
eration, have a specialist check that the
required electrical protection measures
are in place.
• Monitor the equipment during opera-
GB IE
7