Processing Of Warranty Claims; Service; Label Meanings - Parkside PSHL 2 A1 Montage-, Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Warranty and service information / Label meanings
The warranty applies to defects in material or
manufacture. This warranty does not apply to
product parts subject to normal wear and tear
and which can therefore be considered as wear
items, or to damage to fragile parts, e.g. switches,
storage batteries or glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained.
All instructions provided in the instructions for use
must be followed strictly to constitute proper use
of the product. Purposes and practices which the
operating instructions warn of or advise against
must be avoided without fail.
This product is intended for private, non-commercial
use only. Any incorrect or improper use of the de-
vice, use of force and changes not performed by our
authorized service branch will void the warranty.
Processing of warranty
z z
claims
Please follow the instructions below to ensure your
claim is processed quickly:
When inquiring about your product please have
your receipt and product number (e.g. IAN) ready
as your proof of purchase.
The product number can be found on the type
plate, an engraving, the cover page of your
instructions (bottom left) or the decal at the back
or bottom. In the event of malfunctions or other
defects, please first contact the service department
below by phone or e-mail.
A product recorded as defective, along with the
proof of purchase (sales receipt) and a description
of the defect and when it occurred, can then be re-
turned free of charge to you to the service address
provided.
Note:
On www.lidl-service.com you can download
this as well as many other manuals, product
videos and software.
52 GB/IE/NI

Service

z z
Only use original accessory parts:
Viewing pane 109.9 mm x 85.8 mm
Rear pane 98.3 mm x 45.9 mm.
How to contact us:
GB, IE, NI
Name: C. M. C. GmbH
Website: www.cmc-creative.de
E-mail: service.gb@cmc-creative.de
Phone: 0-808-189-0652
Registered office: Germany
IAN 286805
Please note that the following address is not a
service address. Please first contact the service
point named above.
Address:
C. M. C. GmbH
Katharina-Loth-Str. 15
DE-66386 St. Ingbert
DEUTSCHLAND
Ordering spare parts:
www.lidl.com/contact-us
z Label meanings
Safety viewing panels approved
according to DIN EN 166: CMC 1 F CE
Legend:
CMC = manufacturer code
1 = optical class
F = low power shock
CE = CE symbol)