Carrier WTC-IS Installationsanweisungen Seite 4

To achieve better comfort, it is possible to
adjust the comfort temperature when the
status of the room is occupied.
Setting comfort temperature step
To set the comfort temperature
Press the Up button
■
temperature.
Press the Down button
■
the temperature.
Example:
0 +
For cassette fan coils with motorised louvers,
it is possible to control the direction of the
air flow by adjusting the louver position.
To set the position of louvers
Press the Menu button
■
Louver control menu.
Press the Up button
■
button
to set the position of louvers.
Au
1-6
S_
Press to confirm the selected position.
■
If no button is pressed within 10 seconds,
the home screen is displayed.
All changes are effective immediately.
Note: Louver position can be adjusted only
when the status of the room is occupied.
4
Comfort Temperature
to increase the
to decrease
++ +++ ++++
Louver Position
to access the
or the Down
Depending on system configuration, the
comfort temp. can be controlled by setting
its step (bar graph) or the exact desired
temperature (digital display).
Setting comfort temperature
To set the comfort temperature
Press the Up button
■
temperature.
Press the Down button
■
the temperature.
Example:
Note: Comfort temperature can be adjusted
only when the status of the room is occupied.
Louver positions
1 to 6 fixed positions.
Automatic: Louver position is set
automatically.
Position 1 in Heating mode:
The heated air is directed to the floor level.
Position 6 in Cooling mode:
The cooled air is distributed near the ceiling.
Swing: Louvers keep oscillating from the
top downwards for better air distribution.
Example:
When entering the Louver
menu, the last value that
has been selected for the
louvers is displayed.
The louver position is by
default set to AU
(automatic).
to increase the
to decrease