Fan Speed - Carrier WTC-IS Installationsanweisungen

To optimise energy efficiency of the
building while preserving its occupants
comfort, the controller is scheduled
according to occupancy hours.
You can select the room occupancy manually
if the scheduled program does not match the
current occupancy status of the room.
To set room occupancy
Press to launch the settings
■
matching an occupied room.
Press to launch the settings
■
matching an unoccupied room.
The unit will emit a beep (if enabled) and a
red light will flash when the signal is received
correctly.
Yellow LED = Unoccupied
Green LED = Occupied
Unoccupied: Fan speed is adjusted
automatically.
Occupied: Fan speed is adjusted
automatically to achieve optimum comfort
OR set manually.
To set the fan speed
Press the fan speed button
■
to set the required fan speed.
Low speed
Medium speed
High speed
Automatic: Fan speed will be
adjusted automatically to provide
optimum comfort
Occupancy
Example:
Unoccupied
Unoccupied

Fan Speed

Example:
repeatedly
Fan speed: Medium
Communicating
Occupied
Non-communicating
Occupied
Fan speed: Low
3