Reset Mode; End Of Programming; Technical Data - Kübler CODIX 540 Bedienungsanleitung

4.4 RESET Mode

4.5 End of programming

5. Technical data

Supply voltage:
AC power supply:
DC power supply:
Display:
Data retention:
Polarity of the inputs:
4
manual reset via the red
RESET key and electrical
reset via the RESET input
no reset (red RESET key
and RESET input locked)
only electrical reset via the
RESET input
only manual reset via the
red RESET key
The programming routine is
repeated once more. The
values set until now can be
checked and modified.
The programming routine
wil be left and all values set
will be stored as new
parameters.
Afterwards the device is
ready for operation.
90..260 V AC/max. 6 VA
50/60 Hz
ext. fuse protection: T 0.1 A
10...30 V DC/max. 50 mA
ext. fuse protection: T 0.1 A
6 digits, red 7 segment
LED display, height 14 mm
EEPROM
Programmable, npn or pnp
for all inputs
Input resistance:
Couting frequency:
AC power supply: 90 ... 260 V AC
Input level:
typ. low level:
typ. high level:
Fmax:
DC power supply:
Input level:
typ. low level:
typ. high level:
Fmax:
Minimum pulse length for the reset input:
Switching level:
Standard level (HTL):
AC power supply:
DC power supply:
4 ... 30 V DC level: Low: 0 ... 2 V DC
Pulse shape:
Sensor supply voltage:
AC power supply:
Ambient temperature:
Storage temperature:
Altitude:
EMC:
Noise emission:
Noise immunity:
Device safety
Design to:
Protection Class:
Application area:
appr. 5 kOhm
Standard
2,5 V
22,0 V
60 kHz 50 kHz
24 1 2 V DC 10 ...30 V DC
Standard
2,5 2,0 V
22,0 10 V
60 20 kHz
5 ms
Low: 0 ... 4 V DC
High: 12 ... 30 V DC
Low: 0 ... 0,2 x U B [V DC]
High: 0,6 x U B ... 30 V DC
High: 4 ... 30 V DC
any,
Schmitt Trigger inputs
+24 VDC ± 15 % /100 mA
–20 °C ... +65 °C
–25 °C ... +70 °C
to 2000 m
EN 55 011 Class B
EN 61 000-6-2
EN61010 Part 1
Class 2
Soiling Level 2
5V
1,0 V
4,0 V
5V
1,0 V
4,0 V
8 kHz