IKEA TVÄTTAD PNC914580227 Bedienungsanleitung Seite 22

ENGLISH
Cancelling a running programme
1. Press the button On/Off
the programme and to deactivate the
appliance.
2. Press the button On/Off
activate the appliance.
If the AutoAdjust System has
completed and the water filling
has already started, the new
programme starts without
repeating the AutoAdjust
System. The water and the
detergent are not drained out in
order to avoid waste.
There is also an alternative way of
cancelling:
1. Rotate the programme knob to the
"Reset" position
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
Opening the door
Warning! If the temperature and
level of the water in the drum are
too high and/or the drum is still
rotating you should not open the
door.
Adding garments. It is
recommended to add garments
until the is on.
While a programme or the delay start
operates, the appliance door is locked. The
display shows the indicator
1. Touch the Start/Pause
In the display the related door lock
indicator goes off.
2. Open the appliance door. If necessary,
add or remove the garments. Close the
to cancel
again to
.
.
button.
door and touch the Start/Pause
button.
The programme or the delay start
continues.
The door can be opened when the
programme is completed, or set the
programme to drain the water and
then touch the Start/Pause
End of the programme
When the programme has finished, the
appliance stops automatically. The acoustic
signals operate (if they are active). The
display shows
The indicator of the Start/Pause
goes off.
The door unlocks and the indicator
goes off.
1. Press button On/Off
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance
again, the display shows the end
of the previous programme. Turn
the programme knob to set a
new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser drawer slightly ajar to
prevent mildew and odours.
Draining water out after end of cycle
If you have chosen a programme or an
option that does not empty out the water of
the last rinse, the programme is completed,
but:
22
button.
button
to deactivate