IKEA TVÄTTAD PNC914580227 Bedienungsanleitung Seite 21

ENGLISH
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate.
If a selection is not possible an
acoustic signal sounds and the
display shows
Starting a programme
Touch the Start/Pause
the programme. The related indicator stops
flashing and stays on. It is not possible to
start the programme when the indicator of
the button is off and doesn't flash (e.g.
programme knob on a wrong position).
The programme starts, the door is locked.
The display shows the indicator
The drain pump can operate
shortly before the appliance fills
water.
Starting a programme with the delay start
1. 1. Touch the Delay Start
repeatedly until the display shows the
desired delay time. On the display the
indicator shows
2. Touch the Start/Pause
appliance door locks and starts the
countdown of the delay start. The
display shows the indicator
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Start/Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start
repeatedly until the display shows
and the indicator
.
button to start
.
button
button. The
.
button to
button
goes off.
3. Touch the Start/Pause
to start the programme immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pause
to start the new countdown.
The AutoAdjust System load detection
After touching the Start/Pause
1. The AutoAdjust System starts estimating
the weight of the load to calculate the
real programme duration. During this
phase the indicator
the time digits plays a simple animation.
2. After about 15-20 minutes the indicator
disappears and new cycle
duration is displayed.
The appliance automatically adjusts the
programme duration to the load to
achieve perfect washing results in the
minimum possible time.
Pausing a programme and changing
options
When the programme is running, you can
change only some options:
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause
The washing programme continues.
21
button again
button to
button
button again
button:
placed below
button.
button again.