Troubleshooting - Parkside PDSS 16 A1 Originalbetriebsanleitung

Troubleshooting

Fault
Speed too slow, air
escapes from the
outlet .
Tool does not move;
compressed air
escapes completely
through the outlet .
■ 20 │
GB │ CY
Possible cause
Motor parts
jamming due to
dirt .
Pressure supply
too low .
Motor is jammed
due to material
build-up .
Remedy
Check the pressure
supply filter for
contamination .
Check the pressure
supply filter for
contamination .
Lubricate the tool as
described in the
instructions .
If necessary, repeat
the steps outlined
above .
Lubricate the tool as
described in the
instructions .
PDSS 16 A1