Factory Setting; Call Up The Start Screen; Press; Press For "Set Up - Bosch ACS 752 Originalbetriebsanleitung

en 56 | ACS 752 | ACS 752 settings
12. ACS 752 settings
12.1

Factory setting

Menu
Language
Date/Time
Unit of measurement
Garage data
Flushing
Serial Number
Asanetwork Service
CoRe Main Menu
12.2 Set unit of measurement
1. Call up start screen.
2. Press <MENU>.
3. Press <1> for "Set up".
4. Press <3> for "Unit of measurement".
5. Select unit with u and o.
6. Confirm unit with <OK>.
i
Return with <ESC>.
12.3

System information

1. Call up start screen.
2. Press <MENU>.
3. Press <1> for "Set up".
4. Press <4> for "System Information".
"
The display shows the information on the sw release.
i
Return with <OK> or <Esc>.
12.4 Activation
Menu
Report management
Beeper
UV Oil Manual
PAG POE
ASANETWORK
WiFi Configuration
CoRe Configuration
|
S P00 D00 159 2019-03-01
Factory setting
English
CET
kg/m
empty, no data entered
enabled
Serial number has already been
entered (compare with name
plate)
disabled
disabled
Factory setting
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
12.4.1 Report Management
i
If you want to storage and then print the data of the
loaded and recovered coolant you have to enable the
"Report Management" function (see chapter 13.6).
Once all data of the loaded and recovered coolant
are enabled they are automatically stored.
1. Call up start screen.
2. Press <MENU>.
3. Press <1> for "Set up".
4. Press <6> for "Activations".
5. Select "Report management" with u and o.
6. Enable/Disable with <OK>.
i
Return with <ESC>.
12.4.2 Beeper
i
This function is used to enable or disable the beeper
when pressing the keys or as a warning during op-
eration.
1. Call up start screen.
2. Press <MENU>.
3. Press <1> for "Set up".
4. Press <6> for "Activations".
5. Select "Beeper" with u and o.
6. Enable/Disable with <OK>.
i
Return with <ESC>.
12.4.3 UV Oil manual
i
This function is used to enable or disable the manual
inclusion of oil and UV dye. If injection oil scales is
enabled, oil drain and UV dye are disabled and the
station operates in manual mode.
i
Press <MENU> button to inject oil and UV dye and
visually check the level in the bottles. A series of
messages guide the operator on the proper use of
the operator station.
1. Call up start screen.
2. Press <MENU>.
3. Press <1> for "Set up".
4. Press <6> for "Activations".
5. Select "UV Oil Manual"with u and o.
6. Enable/Disable with <OK>.
i
Return with <ESC>.
Robert Bosch GmbH