Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk RS 2200 Betriebsanleitung

INTRODUCTION

NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualifi ed technicians must read this Manual carefully. Contact
Nilfi sk in case of doubts regarding the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualifi ed to perform the machine maintenance.
The operators must not carry out operations reserved for qualifi ed technicians. Nilfi sk will not be responsible for damages coming
from failure to follow these instructions.

HOW TO KEEP THIS MANUAL

The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.

DECLARATION OF CONFORMITY

The Declaration of Conformity (Fig. A), supplied with the machine, certifi es the machine conformity with the law in force.
NOTE
One copy of the original declaration of conformity is provided together with the machine documentation.
NOTE
If the machine is approved to be used on public roads, the machine is supplied with a special Certifi cation of Conformity.

IDENTIFICATION DATA

The machine model and serial number are marked on the identifi cation plate (1, Fig. C).
The machine model year is written in the Declaration of Conformity and it is also indicated by the fi rst two fi gures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identifi cation data.
MACHINE model ....................................................................
MACHINE serial number ........................................................
CAUTION!
The machine serial number is also printed on the machine frame (25, Fig. E).
USER MANUAL
ENGINE model .......................................................................
ENGINE serial number ...........................................................
RS 2200 33019476(3)2010-02 A
ENGLISH
3