Ransomes FAIRWAY 250 Benutzerhandbuch Seite 24

22
Fig.9
Fig.10
Fig.11
Fig.12
A - LIFT LEVER (FAIRWAY 250 / 305)
Move back and hold to raise the cutteing units.
Move forward and hold to lower the cutteing units.
The lever automatically returns to a neutral position
when released.
B - ROTATIONAL SPEED
Continuous adjustment of reel rotational speed,
from stopped to full speed (approximately 1,300
rpm).
C - WEIGHT TRANSFER
Transfers weight between cutting units and drive
wheels. More weight on the cutting units makes
them track the ground contour more closely.
D - LIFT LEVERS (FAIRWAY 405)
Centre lever lifts all seven cutting unit, front to rear
sequentialy for cross cut capability.
Front lever lifts cutting unit number even, left hand
wing individually.
Rear lever lifts cutting unit number six, right hand
wing individually.
GB GB GB
GB GB