Instructions For Use; In-Office Whitening Treatment - Philips ZOOM! Bedienungsanleitung

Precautions

In-office whitening treatment

Before the in-office whitening treatment
-
If whitening gel gets into the eyes, hold the
eyelids apart and flush the eyes continuously
with running water for at least 15 minutes.
-
If improper isolation leaves a patient's
soft tissue exposed to light, administer
a nonsteroidal anti-inflammatory drug
(NSAIDs) adhering to the respective drug's

instructions for use.

The whitening gel must be removed from
refrigeration and warmed to room temperature
so it will thicken before it is applied to the
patient's teeth. Either:
-
Remove the syringe from refrigeration at
least 6 hours before use (preferably the night
before) or
-
If removed just prior to use, place the syringe
in a cup of hot water (49 °C) for 10 minutes.
Remove the syringe from the water and wait
5 minutes before extruding gel.
Note: Improper soft tissue isolation may result
in irritation or burning of gingiva or swollen lips
due to WhiteSpeed Accelerator light coming
into contact with tissue. Improper soft tissue
isolation may also results in chemical burn due
to whitening gel coming into contact with tissue.
Note: Wait one week after whitening to place
restorations. Patients with porcelain fused
to metal crowns, amalgams, lingual bars or
implants will feel excessive heat.
Complete diagnosis of patient, treat for
sensitivity (see 'Pre-treatment for reducing
tooth sensitivity') and fabricate trays prior to
whitening treatment (see EVA tray material
instructions for use if provided).
English
11