Directions For Use - CooperSurgical RUMI II Gebrauchsanleitung

DIRECTIONS FOR USE

Mating Hole
Latch
Before Attaching the Adapter
The following steps must be completed prior to attaching the
Adapter to the UPS™ arm:
1. Patient is positioned, prepped and the Manipulator Handle is
inserted.
2. UPS arm and patient are properly draped.
Attaching the Adapter to the UPS Arm
1. Align the reinforced punch-out hole in the UPS Sterile Drape
with the Mating Hole in the UPS arm.
2. Insert the Adapter's Engagement Pin (Figure 1) into the UPS
arm's Mating Hole until secure. Use the Alignment Pin for
proper orientation of the Adapter.
3. Ensure that the Adapter is securely in place on the arm.
Before Attaching the Manipulator Handle
The following steps must be completed prior to attaching the
Manipulator Handle to the Adapter:
1. Patient is positioned for surgery.
2. Draped UPS arm and Adapter are placed in approximate
position for attachment near the proximal end of the Manipulator
Handle.
Attaching the Manipulator Handle
CAUTION: DO NOT attach the Manipulator Handle to the UPS
arm until after the patient is in final position and sedated.
1. Open the Latch on the Adapter (Figure 2).
CAUTION: Securely hold the UPS handle before the foot
pedal is depressed to avoid inadvertent movement of the
Manipulator Handle.
Note: For optimal motion, grasp only the handle of the UPS to
move the device.
2. Grasp the handle of the UPS, press the foot pedal, and move
the arm to align the Adapter with the Manipulator Handle. Take
care to minimize movement of the Manipulator Handle within
the patient.
3. Position the Pivot Point on the underside of the Manipulator
Handle into the Mating Hole of the Adapter (Figure 2).
Latch
Front View
Figure 1. RUMI
Figure 2. Attaching the RUMI
Back View
® Adapter
RUMI
Position Pivot Point
into Mating Hole
RUMI
Handle
Alignment Pin
Engagement Pin
II
Handle
II
Adapter