Main Dimensions; Important Note - V-ZUG 698 Installationsanleitung

Installation instructions
Steam cooker
Type of construction 60-381
Model 698

Main dimensions

A
Identification plate
600
Niche 560–568
Built-in not flush
with units
Appliance 596

Important note

– Installation of the appliance above an oven with an air extractor is not possible due to the upwards routing of the
trunking.
– See page 12 for examples of installation variants.
– Mounting kit K0.3448 is to be used to support the upper appliance if a second oven is installed above or below
the appliance in a common niche.
– A ventilation mesh kit is required for installation below a ceramic-glass hob (see J402.54).
Installation
Prepare the niche for the installation.
A
Where not already present, fit a socket to the rear wall of the niche. Note the maximum installation depth (flush
A
mounting may be necessary).
Place appliance in front of the niche and plug in the connector plug.
A
Carefully push the appliance into the niche until the front is flush with the cabinet unit, taking care that the connector
A
cable is not trapped.
Open the appliance door and fix the appliance at the sides with the wood screws A supplied.
A
Niche for
mains cable
A
Identification plate
50
Appliance 554
min. 550 EURO
600
Niche 560–568
Recessed
installation
J698.50 1
26.5.08 ITH
11/12
Solo built-in
45
Appliance
door open
293