Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Serrated stainless steel blade assembly.
The durable serrated stainless steel
blades are strong enough to crush ice
cubes.
Detachable blade system.
The durable stainless steel blades have
a detachable blade assembly, which
unscrews from the jug for easy and thor-
ough cleaning.
Motor base
The base houses a powerful 530-watt
motor, which provides maximum perfor-
mance for any blending task.
Control dial.
For your convenience, there is a large
central dial with two speeds to process a
variety of blending tasks.
Pulse setting.
Provides short bursts of power for greater
control when blending, (especially finer
textured foods such as nuts and choco-
late).
Ideal for crushing ice in seconds.
Cord storage facility.
For tidy convenient storage of the cord
underneath the motor base.
Non-slip feet.
Keep the blender secure on the counter top.
Before using your Multi Blender
Important: Always ensure your blender is
unplugged from the power outlet before
fitting or removing the blade assembly.
Always handle the blade assembly with
caution, as the blades are extremely
sharp.
To assemble the Multi Blender:
1. Place the silicone rubber seal over the
blade assembly.
2. Position the blade assembly into the
base of the blender jug. Ensure that
the blade assembly is firmly in place by
turning it clockwise.
1450_new.indd 5
1450_new.indd 5
1 Plug the power cord into a 230-240 volt
power outlet and turn the power ON.
Note: Do not remove the stainless steel
blades from the blade assembly.
Using your Multi Blender
1. Place the blender jug on the motor
base and rotate counter-clockwise
to lock.
2. Place ingredients into the jug, either by
removing the measuring cup from the
lid or removing the lid.
3. Place the lid with the measuring cup
back onto the blender jug and rotate
the lid counter-clockwise to lock.
Do not exceed the maximum indicated
level of 1,5 l.
4. Using the selector dial, select the
desired blending speed 1, 2 or PULSE.
The PULSE function remains on as long
as the PULSE button is pressed.
Settings 1 and 2 will provide continuous
blending until the dial is turned to the
OFF position.
Further ingredients can also be added
whilst blending by pouring through the
lid hole once the measuring cup has
been removed.
5. After you have completed blending,
turn the dial to the '0' position.
Note: When removing the blade assem-
bly from the jug you may need to slight-
ly tilt the blade so that it slides out eas-
ily, You should not force the blades out
of the jug, as this will ultimately damage
the them.
Feature Uses of the blender
Safety locking system
With safety in mind, the Multi Blender was
designed with a safety locking system.
Unless the lid and blending jug are posi-
tioned correctly and locked in place, the
blender will not operate. To ensure that
you have correctly assembled the Multi
5
ENGLISH
30.10.2008 16:10:20
30.10.2008 16:10:20
Werbung
