Using The Headset; Connecting An Audio Source - Silvercrest SKL 36 A1 Bedienungs- Und Sicherheitshinweise

SilverCrest SKL 36 A1
Prolonged pressing when using as headset or hands-free kit:

Starting the voice control, for example, for smartphones or tablets or
rejecting an incoming call
Please note that the functionality of the multi-function button is
largely dependent on the audio source you are using,
particularly the operating system, for example, for smartphones
or tablets. For further details, please read the operating
instructions for your audio source.

Using the headset

To avoid hearing damage, you must set the volume of your audio
source to the lowest level before connecting the headset. You can
then adjust the volume to the desired level.
Insert the jack plug (4) of the audio jack cable (B) into one of the jack sockets
(6) on the headset earpieces (3). To ensure the correct functioning of the
microphone (5), the jack plug (4) with the two rings and the headphone
symbol must be inserted into the jack socket (6) of the headset (A).

Connecting an audio source

Connect the free jack plug (4) with 3 rings of the audio jack cable (B) to the
headset output of your audio source. Switch on the audio source and start the
playback.
Please read the operating instructions for your audio source in any case.
You can adjust the volume via the volume control on your
audio source.
58 - English