Yamaha RX-V657 Bedienungsanleitung Seite 42

FM/AM TUNING
3
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
The preset number, the MEMORY and AUTO
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
DVR/VCR2
VCR1 V-AUX
SP
A
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually,
and store it by following the procedure in "Manually presetting
stations".
Automatic preset tuning options:
You can select the preset number from which this unit will
store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING l / h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward the lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
40
MEMORY
MAN'L/AUTO FM
DTV/CBL MD/CD-R
DVD TUNER CD PHONO
AUTO TUNED MEMORY VOLUME
Manually presetting stations
You can also store up to 40 stations (8 stations in 5 groups,
A1 through E8) manually.
OPTIMIZER MIC
PHONES SPEAKERS
A B
STANDBY
/ON
SILENT CINEMA
1
Tune into a station.
dB
L R
See page 38 for tuning instructions.
DVR/VCR2
When tuned into a station, the front panel display
shows the frequency of the station received.
2
Press MEMORY (MAN'L/AUTO FM).
The MEMORY indicator flashes for about 5 seconds.
MEMORY
MAN'L/AUTO FM
3
Press A/B/C/D/E (NEXT) repeatedly to select
a preset station group (A to E) while the
MEMORY indicator is flashing.
The group letter appears. Check that the colon (:)
appears in the front panel display.
DVR/VCR2
Preset group
l PRESET/TUNING h
PRESET/TUNING FM/AM A/B/C/D/E MEMORY TUNING MODE
SEARCH MODE EDIT XIM CATEGORY NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO DISPLAY
PROGRAM INPUT
STRAIGHT TONE CONTROL INPUT MODE MULTI CH
INPUT
EFFECT
3 4 2,5
VCR1 V-AUX DTV/CBL DVD MD/CD-R TUNER
TUNED
SP
A
A/B/C/D/E
NEXT
CATEGORY
DTV/CBL MD/CD-R
VCR1 V-AUX DVD TUNER
TUNED
SP
A
VOLUME
PURE DIRECT
VIDEO AUX
S VIDEO VIDEO L AUDIO R OPTICAL
CD PHONO
VOLUME
dB
L R
MEMORY
Flashes
CD PHONO
MEMORY VOLUME
dB
L R