Remote Controlling Zone 2 - Yamaha Rx-V657 Bedienungsanleitung

ZONE 2
Using this unit's internal amplifier
To use this unit's internal amplifier, set "ZONE2 AMP" to INT in the SET MENU (see pages 64).

Remote controlling Zone 2

The supplied remote control can be used to control Zone
2. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
y
You can also turn on/off the main or
MAIN ZONE 2
or on the front panel.
To enable Zone 2 mode on the remote
control
1
Press .
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
3
Enter the code number "2999".
Immediately after you have configured the remote
control for Zone 2, the remote will enter main mode.
When the remote is in main mode, you can turn the
main unit on, or set it in standby mode independently
of Zone 2 by pressing SYSTEM POWER or
STANDBY.
Notes
• If you enable Zone 2, the Zone function is applied to the current
remote control ID (ID1: default code, ID2: alternative code).
However, because the remote control codes for Zone 2 are
common to ID1 and ID2, the remote control ID does not change
even if it is switched.
• To release Zone 2, clear the remote control code set for
set a remote control code other than a TV code for
72
– +
L
R
PRESENCE
/ZONE 2
This unit
Zone 2
mode by pressing
TRANSMIT
, or
.
Second room
To control Zone 2
1
Press to set the remote control to Zone 2.
The TRANSMIT indicator on the remote control
lights up while the remote control is in Zone 2 mode.
2
Press SYSTEM POWER to turn Zone 2 power
on.
3
Press an input selector button to select the
input source you want to listen to in the
second room.
CD
DVD
VCR 1
4
You can control Zone 2 using the input
selector buttons, STANDBY, SYSTEM
POWER, MUTE and VOLUME +/–.
CODE SET
POWER
TV
CD
DVD
VCR 1
TV VOL TV VOL
TV MUTE TV MUTE
y
If "ZONE2 AMP" in OPTION MENU is set to INT, you can use
VOLUME –/+ to adjust sound output from speakers connected to
the PRESENCE/ZONE 2 speaker terminals. However, VOLUME
–/+ cannot be used to adjust sound output from the ZONE2
OUTPUT jacks.
MD/CD-R TUNER SLEEP
DTV/CBL V-AUX MULTI CH IN
DVR/VCR2 AMP
TRANSMIT
SYSTEM
POWER STANDBY POWER
AV
MD/CD-R TUNER SLEEP
DTV/CBL V-AUX MULTI CH IN
DVR/VCR2 AMP
TV CH TV CH
VOLUME
TV INPUT TV INPUT
MUTE