Herunterladen Inhalt Inhalt Diese Seite drucken

To Mute The Sound - Yamaha RX-V657 Bedienungsanleitung

Av receiver
Vorschau ausblenden Andere Handbücher für RX-V657:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 184
7
Select a sound field program if desired.
Use PROGRAM (or press AMP to select the AMP
mode, then press one of the sound field program
buttons) to select a sound field program. See page 48
for details about sound field programs.
PROGRAM
Front panel
AMP
Remote control
To listen with headphones ("SILENT
CINEMA")
"SILENT CINEMA" allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
surround, through ordinary headphones. "SILENT
CINEMA" activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the "SILENT CINEMA" indicator lights up in
the front panel display.
Notes
• This unit will not be set to "SILENT CINEMA" when MULTI
CH INPUT is selected as the input source.
• "SILENT CINEMA" is not effective when PURE DIRECT or
the 2ch Stereo program is selected, or in STRAIGHT mode.
or
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
STANDARD
SELECT
EXTD SUR.
PURE DIRECT
5
6
7
8
A
SPEAKERS
B
NIGHT
STRAIGHT
9
0
10
ENT.
EFFECT
To adjust the tone
You can adjust the tonal quality
of your front left and right,
center, and subwoofer speakers or
headphones (when connected).
Press TONE CONTROL on the
front panel repeatedly to select
TREBLE or BASS, then rotate
PROGRAM to the right or left to
increase or decrease.
• Select TREBLE to adjust the
high frequency response.
• Select BASS to adjust the low
frequency response.
y
Speaker and headphone adjustments are stored independently.
Notes
• TONE CONTROL is not effective during playback in the PURE
DIRECT mode, or when MULTI CH INPUT is selected
(page 32).
• When TONE BYPASS is set to "AUTO" (page 60), and BASS
and TREBLE are set to 0 dB, audio output automatically
bypasses this unit's tone control circuitry.

To mute the sound

Press MUTE on the remote control.
The MUTE indicator flashes in the
front panel display.
To resume the audio output, press
MUTE again (or press VOLUME –/+).
The MUTE indicator disappears from
the display.
y
You can adjust the muting level (see page 60).
PLAYBACK
TONE CONTROL
PROGRAM
MUTE
31

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis