Remote Control - Yamaha Rx-V657 Bedienungsanleitung

Remote control

Problem
The remote control Wrong distance or angle.
does not work nor
function properly.
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
The batteries are weak.
The remote control code was not correctly
set.
The remote control ID and this unit's ID
do not match.
Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.
Cause
The remote control will function within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.
Reposition this unit.
Replace all batteries.
Set the remote control code correctly using "LIST OF
REMOTE CONTROL CODES" at the end of this
manual.
Try to set another code for the same manufacturer
using "LIST OF REMOTE CONTROL CODES" at
the end of this manual.
Switch the library code.
TROUBLESHOOTING
Remedy
Refer to
page
7
—
3
68
68
70
85