Yamaha RX-V650 Bedienungsanleitung Seite 33

7
Select a sound field program if desired.
Use PROGRAM (or press AMP to select the AMP
mode, then press one of the sound field program
buttons repeatedly) to select a sound field program.
See page 47 for details about sound field programs.
PROGRAM
or
Front panel
STEREO
To listen with headphones (SILENT CINEMA)
"SILENT CINEMA" allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
surround, through ordinary headphones. "SILENT
CINEMA" activates automatically whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP or HiFi DSP sound field programs. When
activated, the "SILENT CINEMA" indicator lights up in
the front panel display.
Notes
• This unit will not be set to "SILENT CINEMA" when MULTI
CH INPUT is selected as the input source.
• "SILENT CINEMA" is not effective when PURE DIRECT or
2ch Stereo is selected, or in STRAIGHT mode.
AMP
HALL JAZZ ROCK
1 2 3 4
MUSIC ENTERTAIN TV THTR MOVIE
5 6 7 8
q/DTS
NIGHT EX/ES STRAIGHT
9 0 10
ENTER
EFFECT
Remote control
To adjust the tone
You can adjust the tonal quality
of your front left and right,
center, presence and subwoofer
speakers or headphones (when
connected).
Press TONE CONTROL on the
front panel repeatedly to select
TREBLE or BASS, then rotate
PROGRAM to the right or left to
increase or decrease.
• Select TREBLE to adjust the
high frequency response.
• Select BASS to adjust the low frequency response.
To cancel the tone control, press TONE CONTROL
repeatedly to select BYPASS.
y
Speaker and headphone adjustments are stored independently.
Note
TONE CONTROL is not effective during playback in the PURE
DIRECT mode, or when MULTI CH INPUT is selected
(page 35).
To mute the sound
Press MUTE on the remote control.
The MUTE indicator blinks in the
front panel display.
To resume the audio output, press
MUTE again (or press
VOLUME –/+). The MUTE
indicator disappears from the display.
y
You can adjust the muting level (see page 59).
PLAYBACK
TONE CONTROL
PROGRAM
MUTE
31