Receiving Rds Stations; Changing The Rds Mode - Yamaha RX-V650 Bedienungsanleitung

Receiving RDS stations

RDS (Radio Data System) is a data transmission system
used by FM stations in many countries. The RDS function
is carried out among the network stations.
This unit can receive various RDS data such as PS
(Program Service name), PTY (Program Type), RT (Radio
Text), CT (Clock Time), EON (Enhanced Other
Networks) when receiving RDS broadcasting stations.
PS (Program Service name) mode:
The name of the RDS station being received is displayed.
PTY (Program Type) mode:
There are 15 program types to classify RDS stations.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R. M Middle-of-the-road music
LIGHT M
CLASSICS
OTHER M
RT (Radio Text) mode:
Information about the program (such as the title of the
song, name of the singer, etc.) on the RDS station being
received is displayed by a maximum of 64 alphanumeric
characters, including the umlaut symbol. If other
characters are used for RT data, they are displayed with
under-bars.
CT (Clock Time) mode:
The current time is displayed and updated every minute.
If the data are accidentally cut off, "CT WAIT" may
appear.
EON (Enhanced Other Networks):
See "EON function" on the following page.
News
Current affairs
General information
Sports
Education
Drama
Culture
Science
Light entertainment
Pops
Rock
(easy-listening)
Light classics
Serious classics
Other music

Changing the RDS mode

Four modes are available for displaying RDS data. The
PS, PTY, RT and/or CT indicators that correspond to the
RDS data services offered by the station light up in the
front panel display. Press RDS MODE/FREQ (or FREQ/
RDS on the remote control) repeatedly to display the
various RDS data offered by the transmitting station as
shown below.
RDS MODE/FREQ
Front panel
or
FREQ/RDS
Remote control
y
When performing this operation with the remote control, first
press TUNER to set the remote to tuner mode.
Notes
• Do not press RDS MODE/FREQ until an RDS indicator lights
up in the front panel display. You cannot change the mode if
you press the button prior to this. This is because this unit has
not finished receiving all of the RDS data from the station.
• RDS data not offered by the station cannot be selected.
• This unit cannot utilize the RDS data source if the signal
received is not strong enough. In particular, the RT mode
requires a large amount of data, so it is possible that the RT
mode may not be displayed even if other RDS modes (PS, PTY,
etc.) are displayed.
• RDS data may not be received under poor reception conditions.
In such cases, press TUNING MODE so that the AUTO
indicator disappears from the front panel display. Although this
will change the reception mode to manual, RDS data may be
displayed when you change the display to RDS mode.
• If the signal strength is weakened by external interference
during the reception of an RDS station, the RDS data service
may be cut off suddenly and "...WAIT" will appear in the front
panel display.
TUNING
PS
PTY
RT
CT
Frequency display
43