If An Error Screen Appears - Yamaha RX-V650 Bedienungsanleitung

8
Use the cursor buttons to display the results.
• Press u / d to display information about
individual results.
• Press j / i to switch between each result list.
RESULT:WIRING
FRONT L;;;;;;;OK
[<]/[>]:Select
[SELECT]:Return
9
When finished, press SELECT.
The RESULT:EXIT screen appears.
10
Press u / d to select SET or CANCEL.
RESULT:EXIT
NO WARNING
RESULT LIST
. )SET
[ ]/[ ]:Up/Down
[SELECT]:Enter
SET
To apply the auto setup (YPAO)
settings.
CANCEL
To cancel the auto setup (YPAO)
without making any changes.
11
Press SELECT to set or cancel the auto
setup settings.
y
If you are not satisfied with the result or want to manually adjust
each setup parameter, use the manual setup parameters (see
page 54).
Notes
• If E-10 appears during testing, restart the procedure from step 3.
• To cancel the auto setup procedure before completion, press
SET MENU.
CANCEL

If an error screen appears

1
Press SELECT to display detailed
information about the error.
ERROR
. E-5:NOISY
)RETRY
[ ]/[ ]:Up/Down
[SELECT]:Enter
2
Press j / i to switch between error
messages.
For details about each message, see page 29.
ERROR: E-5
< NOISY >
Keep SILENT
[SELECT]:Return
3
When finished, press SELECT to return to
the main error screen.
4
Press u / d to select RETRY or EXIT, then
press SELECT.
ERROR
E-5:NOISY
. )RETRY
[ ]/[ ]:Up/Down
[SELECT]:Enter
RETRY
To retry the auto setup procedure.
EXIT
To exit auto setup.
AUTO SETUP
EXIT
EXIT
27