Memory Guard - Yamaha RX-V650 Bedienungsanleitung

SET MENU

Memory guard

B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
B)MEMORY GUARD
)OFF
[<]/[>]:Select
[SELECT]:Return
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
• The on-screen display (OSD) mode
Note
When "MEMORY GUARD" is set to ON, you cannot use the test
tone or select any other SET MENU items.
Parameter initialization
Use this feature to initialize the parameters for each sound
program within a sound
field
you initialize a sound
field
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
C)PARAM. INI
1
5
9
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a
• You cannot separately initialize individual
programs.
• You cannot initialize any program groups when "MEMORY
GUARD" is set to ON.
62
ON
C)PARAM. INI
program group. When
field
program group, all of the
2 3 4
6 7 *8
sound
field program group.
sound
field
Zone set
Use to specify the location of speakers connected to the
SPEAKERS B terminals.
Speaker B set
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Notes
• If you connect headphones to the PHONES jack on the unit
field
when "SP B" is set to ZONE B, the sound is output from both
headphones and SPEAKERS B.
• If a DSP program is selected when "SP B" is set to ZONE B,
the unit automatically enters the Virtual CINEMA DSP mode.
D)ZONE SET
D)ZONE SET
SP B;;;;;;FRONT
[<]/[>]:Select
[SELECT]:Return
SP B