Option Menu - Yamaha RX-V650 Bedienungsanleitung

For COAXIAL INPUT jacks 5 and 6
Choices: CD, V-AUX, DTV/CBL, VCR 1, MD/CD-R,
DVD, DVR/VCR2
COAXIAL IN
. (5);;;;;
(6);;;;;
Notes
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
Input mode
B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 36 for details about the input mode).
Choices: AUTO, LAST
B)INPUT MODE
)AUTO
[<]/[>]:Select
[SELECT]:Return
• Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that source.
Note
Even if LAST is selected, the last setting for the EX/ES button
will not be recalled.
CD
( CD )
DVD
( DVD )
LAST

3 OPTION MENU

Use to adjust the optional system parameters.
3 OPTION MENU1/2
. A)DISPLAY SET
B)MEMORY GUARD
C)PARAM. INI
D)ZONE SET
[ ]/[ ]:Up/Down
[SELECT]:Enter
Display set
A)DISPLAY SET
A)DISPLAY SET
. DIMMER;;;;;;;;;0
V CONV;;;;;;;;ON
OSD SHIFT;;;;;;0
GRAY BACK;;;AUTO
[ ]/[ ]:Up/Down
[<]/[>]:sELECT
Dimmer DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
Video conversion V CONV.
Use this feature to turn on/off conversion of composite
(VIDEO) signals to S-Video signals. This allows you to
output converted video signals from the S VIDEO jacks
when no S-Video signals are input.
Choices: ON, OFF
• Select OFF not to convert any signals.
• Select ON to convert composite signals to S-Video
signals.
Note
Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (i.e., S-Video) between each component.
OSD shift OSD SHIFT
Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press + to lower the position of the OSD.
• Press – to raise the position of the OSD.
Gray back GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there's no video signal input.
Nothing is displayed if OFF is selected.
Choices: AUTO, OFF
Note
If "GRAY BACK" is set to OFF, no information will be displayed
on the screen when video signals are not being input.
SET MENU
61