Cleaning, Care And Maintenance - AEG LL10.0 Bedienungsanleitung

Error/Problem
Battery cannot be
charged
long charging
time
Battery voltage
too low
cleanInG, care anD MaInTe-
nance
▪
clean clamps after every charging To prevent corrosion, wipe off any battery
fluid which may have come into contact with the clamps
▪
carefully wind the cable when storing the device This will help prevent acciden-
tal damage to the cable and the device
▪
clean the product with a soft, dry cloth
▪
store the machine in a clean, dry place
Possible cause
no power supply, charger not
plugged in
only a very low charging current
is used in very low temperatures
(below 0 ˚c) This will extend
the charging time as the battery
warms up, the charging current is
adjusted accordingly
Battery capacity too high for the
charger being used
Battery wasn't charged long
enough
GB
Correction
Verify the charger is
plugged into a 230 V
mains outlet and the
"Power" leD (15) is
on Battery may be
defective
charge battery in
normal conditions
explosion hazard!
never charge frozen
batteries
use a suitable
charger
ensure the battery
is charged long
enough
35