Safety Functions; Cleaning, Care And Service - AEG LP 3.8 Bedienungsanleitung

20
CHargiNg moDE
aND timE
Battery Mode For about
size (Ah) 80% charge
(hours)
2 small batteries 2
< 14.4 a
8 8
20 large batteries, 4.5
normal
conditions
60 14
100 23
large batteries,
temperatures
120 28
below 0 °C

saFEtY FUNCtioNs

▪
the charge is protected from user error and pre-
vents damage to the connected battery.
▪
No risk of overcharging!
▪
the charger will not damage the electronics in your
vehicle.
Protection Description
abnormal to avoid damage to charger and
operation battery, the charger will turn off its
own electronic system and will im-
mediately reset the system to basic
settings in the case of
▪
short circuit
▪
wrong connection
▪
open circuit
▪
reversed polarity connection
▪
battery voltage below
8.0 V ± 0.5 V
the charger will remain in staNDBY
mode and FaULt LED is lit to indicate
reverse polarity or fault.
Protection Description
overheat the charger is protected by NtC
(negative temperature coefficient)
control to protect itself from damage.
During the charging process, if the
charger becomes too hot or due to
high ambient temperature, the power
output is automatically reduced.
the charger continues to trickle
charge and automatically starts
increasing power when the
temperature drops.
mCU Fully controlled by internal
Control micro-Computer-Unit (mCU), which
assures a faster, powerful, reliable
and smarter charging process.
plugged in, the charger
▪
detects the state of charge of the
battery.
▪
initiates charging process.
spark to eliminate the possibility of sparks,
the charger will not begin operation
upon connection to the battery, unless
charging mode has been selected.
Housing protection dust and splash
proof (ip65) double insulated
CLEaNiNg, CarE
aND sErViCE
Your charger can be kept functional for years with
minimum care.
▪
after the charging process is completed, clean the
clamps. to prevent corrosion, wipe off any battery
fluid that has come into contact with the clamps.
▪
roll up the cables properly when you store the
charger. this helps to prevent damage to the cables
and the charger.
▪
occasional cleaning of the charger casing with
a soft cloth keeps the surface shiny and helps to
prevent corrosion.
▪
store the charger in a clean and dry location.
Service
Leave the repair of the device to qualified technical
personnel. thus, the safety of the device is guaranteed
and maintained.
Caution!
only qualified technical personnel should change the
plug or the connecting cables.
this will guarantee the safety of the device is main-
tained.
if the product is no longer suitable for use dispose of it
in an environmentally friendly manner in accordance
with your local ordinances.
GB
Disposal
Do not dispose of packaging or the product
through your household waste! the product
and packaging are made from recyclable
materials (plastics, metals, paper).
if the product is no longer suitable for use dispose of it
in an environmentally friendly manner in accordance
with your local ordinances.
Warranty and Service
the general warranty terms apply to defects in manu-
facturing and material.
please return the defective product to your retailer.
to process your claim efficiently you will also need:
▪
a copy of the receipt including date of purchase.
▪
reason for return (description of defect).
21