Maintenance And Care; Cleaning, Maintenance And Storage; Technical Specifications - AEG LP 10.0 Bedienungsanleitung

32
5.0 MAINTENANCE
AND CARE

5.1 Cleaning, maintenance and storage

5.1.1 Caution! Power off charger (button
and disconnect from 230 V alternating current
before cleaning the equipment!
5.1.2 Clean the charger with a dry cloth.
Do not use liquids or harsh cleaning agents as
this may result in discoloration or damage to
the equipment surface, potentially damaging
the charger! Prevent any fluids from entering the
equipment! Never immerse the equipment in
fluids! Only operate charger when dry.
5.1.3 Always store charger in a dry location!
Moisture could damage the charger's electronic
circuit!
5.1.4 Never expose charger to extreme
temperature fluctuations! Condensation can
damage the electronic circuit!
5.1.5 When storing the charger only loosely fold
cables and store in the charger's storage shelf
to avoid damage to the cable.
Secure battery clamps to the designated brackets
inside the left and right
1
ment (see page 24, figure 1).
)
6
3
charger compart-
4
6.0 TECHNICAL
SPECIFICATIONS
Device description: Charger LP 10.0
Item number:
Dimensions:
Weight:
Display:
Input voltage:
Output voltage /
Output current:
Efficiency:
Battery types:
Battery capacity:
Operating
temperature:
Charging curve:
IP Class
(safety class):
97100
approx. 270 x 150 x 190
mm (l x w x h mm)
approx. 2.3 kg
LED display
230 V 50 Hz / 2 A
~
(V = Volt, Hz = Hertz,
cycles per second)
6 V / 10 A, 12 V / 10 A,
24 V / 6 A DC (A =
ampere, DC = direct current)
> 80 %
6 V / 12 V / 24 V
Lead acid batteries:
▪ Lead acid storage
batteries
▪ Lead gel storage batteries
▪ Mat / AGM storage
batteries
▪ VRLA storage batteries
▪ Maintenance free lead
acid storage batteries
1.2 - 225 Ah
(ampere-hours)
0 C - 50 C (Celsius)
° °
IOIUOUOIUOa
IP65, waterproof
Devices with Protective
Class II protective insulation
This equipment complies
with EU directives
▪ Low Voltage
Directive (2006/95/EC)
▪ Electromagnetic
compatibility directive
(2004/108/EC)